Tote Vision Computer Monitor LCD 1048HDM2 User Manual

10.4" LCD HD Monitors in Metal Housing  
LCD-1048HDM  
LCD-1048HDM2  
Side View  
LCD-1048HDM  
LCD-1048HDM2  
Display:  
Back Light:  
Input Signal:  
10.4" TFT LCD active matrix  
2 x CCFT  
3mm thick tempered glass helps to protect display panel  
from damage in the field  
HD compatible (supports 480p/i, 720p, 1080p/i)  
RS-232 serial control provided  
[Composite, component, & S-Video, NTSC/PAL auto sensing]  
analog RGB  
0.206 (H) x 0.206 (V)mm  
1024(H) x 768(V) [700 lines for CCTV] or  
786,432 dots  
350 cd/m² (Nit)  
262,144  
500:1  
90/90/90/90 degrees  
Composite video BNC IN/OUT provides security  
for video connections  
Underscan capability  
Dot Pitch:  
Resolution:  
Number of Pixels:  
Brightness Rating:  
Colors:  
On-screen display controls, with front controls for  
Power, Select, Menu, and Volume Up/Down  
Wireless remote control with hot key allows  
easy toggling between sources  
Contrast Ratio:  
Viewing Angle L/R/T/B:  
Pixel Configuration:  
Audio output:  
Rear IR jack allows direct connection for  
use with IR repeater systems  
RGB Vertical Stripe  
5W x 2, 8 ohm  
Screw-down DC feature provides additional  
Dimensions including BNC jack (WHD):  
LCD-1048HDM2: Dimensions (WHD):  
Actual visible screen size (WH):  
Operating temperature:  
247 x 215 x 58mm / 9.7" x 8.5" x 2.3"  
19" x 8.75" x 2.3" (Occupies 5 RU)  
210 x 158mm / 8.3" x 6.2"  
50~104°F or 10 ~ 40°C  
14 ~ 158°F or -10 ~ 70°C  
12VDC, 2A, negative ground/24W  
Composite: BNC IN/OUT jacks, 2 RCA IN jacks  
Component: 3 RCA IN jacks  
S-Video IN jack  
Audio: 3.5 PC audio IN, RCA L/R audio inputs,  
L/R screw down speaker connectors,  
and 3.5 audio line OUT  
PC: 15-pin mini D-sub  
security for power connection  
Speaker output on board allows screw down  
connection for R/L audio  
Built-in amplifier provides ample power to drive  
right and left stereo 8 ohm speakers  
Storage temperature:  
Power requirement/consumption:  
Rear Terminal Connections:  
Made of durable metal with black powder coating  
Built-in interface and proper cable exiting for  
wall arm mounting, VESA 75mm compliant  
Response time: 15/25 ms (rising/falling)  
SPS included, 100~240 VAC  
Dual Rack-mounted 10.4" Monitors  
Model LCD-1048HDM2 (shown above)  
RS-232: 9-pin  
3.5 IR IN  
Dimensions (WHD): 19" x 8.75" x 2.3" (Occupies 5 RU)  
Power: 2.1mm DC jack, screw down DC connector  
Net: 2.4 kg. / 5.3 lbs.  
Gross: 3.7 kg. / 8.05 lbs  
Net: 6.07 kg. /13.4 lbs.  
LCD-1048HDM Weight:  
LCD-1048HDM2 Weight:  
Optional Accessories  
DC-1500  
HM-400  
WM-31  
Factory approved car cord  
Under-cabinet hinge mount  
Wall mount bracket (fixed)  
Gross: 8.77 kg. /19.35 lbs  
WM-302  
Wall mount with swing arm & 4-way adjustable  
GS-07F-0069L, SIN: 246-42(1), 246-50  
1319 Dexter Ave. N. • Ste. 020 • Seattle, WA 98109  
Tel: 206-623-6000 • FAX: 206- 623-6609  
Specifications subject to change without notice  
©2009 ToteVision  
30K  
 
P.17  

Tatung Computer Monitor DS42 AV User Manual
Technicolor Thomson Stereo System CS700 User Manual
Thermo Products Furnace MO 455 User Manual
Toshiba CRT Television 20A43 User Manual
Toshiba CRT Television 26HF15 User Manual
Tripp Lite Switch B034 102 R User Manual
UNICOM Electric Switch FEP 31016T 1 User Manual
Uniden Telephone XCA750 User Manual
Univex Computer Monitor 2217V User Manual
Viking Microwave Oven DMOD240 User Manual